- NAME
- return — Return from a procedure, or set return code of a script
- SYNOPSIS
- DESCRIPTION
- EXCEPTIONAL RETURN CODES
- ok (or 0)
- error (or 1)
- return (or 2)
- break (or 3)
- continue (or 4)
- value
- RETURN OPTIONS
- -errorcode list
- -errorinfo info
- -errorstack list
- -level level
- -options options
- RETURN CODE HANDLING MECHANISMS
- EXAMPLES
- SEE ALSO
- KEYWORDS
return — Return from a procedure, or set return code of a script
return ?result?
return ?-code code? ?result?
return ?option value ...? ?result?
In its simplest usage, the return command is used without options
in the body of a procedure to immediately return control to the caller
of the procedure. If a result argument is provided, its value
becomes the result of the procedure passed back to the caller.
If result is not specified then an empty string will be returned
to the caller as the result of the procedure.
The return command serves a similar function within script
files that are evaluated by the source command. When source
evaluates the contents of a file as a script, an invocation of
the return command will cause script evaluation
to immediately cease, and the value result (or an empty string)
will be returned as the result of the source command.
In addition to the result of a procedure, the return
code of a procedure may also be set by return
through use of the -code option.
In the usual case where the -code option is not
specified the procedure will return normally.
However, the -code option may be used to generate an
exceptional return from the procedure.
Code may have any of the following values:
- ok (or 0)
-
Normal return: same as if the option is omitted. The return code
of the procedure is 0 (TCL_OK).
- error (or 1)
-
Error return: the return code of the procedure is 1 (TCL_ERROR).
The procedure command behaves in its calling context as if it
were the command error result. See below for additional
options.
- return (or 2)
-
The return code of the procedure is 2 (TCL_RETURN). The
procedure command behaves in its calling context as if it
were the command return (with no arguments).
- break (or 3)
-
The return code of the procedure is 3 (TCL_BREAK). The
procedure command behaves in its calling context as if it
were the command break.
- continue (or 4)
-
The return code of the procedure is 4 (TCL_CONTINUE). The
procedure command behaves in its calling context as if it
were the command continue.
- value
-
Value must be an integer; it will be returned as the
return code for the current procedure. Applications
and packages should use values in the range 5 to 1073741823 (0x3fffffff)
for their own purposes. Values outside this range are reserved
for use by Tcl.
When a procedure wants to signal that it has received invalid
arguments from its caller, it may use return -code error
with result set to a suitable error message. Otherwise
usage of the return -code option is mostly limited to
procedures that implement a new control structure.
The return -code command acts similarly within script
files that are evaluated by the source command. During the
evaluation of the contents of a file as a script by source,
an invocation of the return -code code command will cause
the return code of source to be code.
In addition to a result and a return code, evaluation of a command
in Tcl also produces a dictionary of return options. In general
usage, all option value pairs given as arguments to return
become entries in the return options dictionary, and any values at all
are acceptable except as noted below. The catch command may be
used to capture all of this information — the return code, the result,
and the return options dictionary — that arise from evaluation of a
script.
As documented above, the -code entry in the return options dictionary
receives special treatment by Tcl. There are other return options also
recognized and treated specially by Tcl. They are:
- -errorcode list
-
The -errorcode option receives special treatment only when the value
of the -code option is TCL_ERROR. Then the list value
is meant to be additional information about the error,
presented as a Tcl list for further processing by programs.
If no -errorcode option is provided to return when
the -code error option is provided, Tcl will set the value
of the -errorcode entry in the return options dictionary
to the default value of NONE. The -errorcode return
option will also be stored in the global variable errorCode.
- -errorinfo info
-
The -errorinfo option receives special treatment only when the value
of the -code option is TCL_ERROR. Then info is the initial
stack trace, meant to provide to a human reader additional information
about the context in which the error occurred. The stack trace will
also be stored in the global variable errorInfo.
If no -errorinfo option is provided to return when
the -code error option is provided, Tcl will provide its own
initial stack trace value in the entry for -errorinfo. Tcl's
initial stack trace will include only the call to the procedure, and
stack unwinding will append information about higher stack levels, but
there will be no information about the context of the error within
the procedure. Typically the info value is supplied from
the value of -errorinfo in a return options dictionary captured
by the catch command (or from the copy of that information
stored in the global variable errorInfo).
- -errorstack list
-
The -errorstack option receives special treatment only when the value
of the -code option is TCL_ERROR. Then list is the initial
error stack, recording actual argument values passed to each proc level.
The error stack will
also be reachable through info errorstack.
If no -errorstack option is provided to return when
the -code error option is provided, Tcl will provide its own
initial error stack in the entry for -errorstack. Tcl's
initial error stack will include only the call to the procedure, and
stack unwinding will append information about higher stack levels, but
there will be no information about the context of the error within
the procedure. Typically the list value is supplied from
the value of -errorstack in a return options dictionary captured
by the catch command (or from the copy of that information from
info errorstack).
- -level level
-
The -level and -code options work together to set the return
code to be returned by one of the commands currently being evaluated.
The level value must be a non-negative integer representing a number
of levels on the call stack. It defines the number of levels up the stack
at which the return code of a command currently being evaluated should
be code. If no -level option is provided, the default value
of level is 1, so that return sets the return code that the
current procedure returns to its caller, 1 level up the call stack. The
mechanism by which these options work is described in more detail below.
- -options options
-
The value options must be a valid dictionary. The entries of that
dictionary are treated as additional option value pairs for the
return command.
Return codes are used in Tcl to control program flow. A Tcl script
is a sequence of Tcl commands. So long as each command evaluation
returns a return code of TCL_OK, evaluation will continue to the next
command in the script. Any exceptional return code (non-TCL_OK)
returned by a command evaluation causes the flow on to the next
command to be interrupted. Script evaluation ceases, and the
exceptional return code from the command becomes the return code
of the full script evaluation. This is the mechanism by which
errors during script evaluation cause an interruption and unwinding
of the call stack. It is also the mechanism by which commands
like break, continue, and return cause script
evaluation to terminate without evaluating all commands in sequence.
Some of Tcl's built-in commands evaluate scripts as part of their
functioning. These commands can make use of exceptional return
codes to enable special features. For example, the built-in
Tcl commands that provide loops — such as while, for,
and foreach — evaluate a script that is the body of the
loop. If evaluation of the loop body returns the return code
of TCL_BREAK or TCL_CONTINUE, the loop command can react in such
a way as to give the break and continue commands
their documented interpretation in loops.
Procedure invocation also involves evaluation of a script, the body
of the procedure. Procedure invocation provides special treatment
when evaluation of the procedure body returns the return code
TCL_RETURN. In that circumstance, the -level entry in the
return options dictionary is decremented. If after decrementing,
the value of the -level entry is 0, then the value of
the -code entry becomes the return code of the procedure.
If after decrementing, the value of the -level entry is
greater than zero, then the return code of the procedure is
TCL_RETURN. If the procedure invocation occurred during the
evaluation of the body of another procedure, the process will
repeat itself up the call stack, decrementing the value of the
-level entry at each level, so that the code will
be the return code of the current command level levels
up the call stack. The source command performs the
same handling of the TCL_RETURN return code, which explains
the similarity of return invocation during a source
to return invocation within a procedure.
The return code of the return command itself triggers this
special handling by procedure invocation. If return
is provided the option -level 0, then the return code
of the return command itself will be the value code
of the -code option (or TCL_OK by default). Any other value
for the -level option (including the default value of 1)
will cause the return code of the return command itself
to be TCL_RETURN, triggering a return from the enclosing procedure.
First, a simple example of using return to return from a
procedure, interrupting the procedure body.
proc printOneLine {} {
puts "line 1" ;# This line will be printed.
return
puts "line 2" ;# This line will not be printed.
}
Next, an example of using return to set the value
returned by the procedure.
proc returnX {} {return X}
puts [returnX] ;# prints "X"
Next, a more complete example, using return -code error
to report invalid arguments.
proc factorial {n} {
if {![string is integer $n] || ($n < 0)} {
return -code error \
"expected non-negative integer,\
but got \"$n\""
}
if {$n < 2} {
return 1
}
set m [expr {$n - 1}]
set code [catch {factorial $m} factor]
if {$code != 0} {
return -code $code $factor
}
set product [expr {$n * $factor}]
if {$product < 0} {
return -code error \
"overflow computing factorial of $n"
}
return $product
}
Next, a procedure replacement for break.
proc myBreak {} {
return -code break
}
With the -level 0 option, return itself can serve
as a replacement for break, with the help of interp alias.
interp alias {} Break {} return -level 0 -code break
An example of using catch and return -options to
re-raise a caught error:
proc doSomething {} {
set resource [allocate]
catch {
# Long script of operations
# that might raise an error
} result options
deallocate $resource
return -options $options $result
}
Finally an example of advanced use of the return options
to create a procedure replacement for return itself:
proc myReturn {args} {
set result ""
if {[llength $args] % 2} {
set result [lindex $args end]
set args [lrange $args 0 end-1]
}
set options [dict merge {-level 1} $args]
dict incr options -level
return -options $options $result
}
break, catch, continue, dict, error, errorCode, errorInfo, proc, source, throw, try
break, catch, continue, error, exception, procedure, result, return
Copyright © 1993 The Regents of the University of California.
Copyright © 1994-1996 Sun Microsystems, Inc.